Home

About Us

Installation

Support

Consultancy

Distillation Methods

Distillation Units

Industry leading
technology

Events

Contact

Privacy and Cookies

Short Path Distillation Systems

Thank you

Special Offer

KDL-6

The KDL-6 is our mid-range short path distillation system and is ideal if you are expanding your operation for processing Hemp and Cannabis to produce higher purity CBD Oil or THC Oil.

The KDL-6 is installed on a GMP-compliant 304 Stainless Steel welded frame and features a 2 litre heated feed tank and support plate, with the feed being controlled via a metering pump. The KDL-6 features a heated glass evaporator which is capable of processing 2 litres of feedstock per hour and a 6-position carousel which allows for collection of the distillate.

The additional benefits of the KDL-6 over the Mini-5 are the inclusion of a cold trap circulator system, which eliminates the need to source dry ice or liquid nitrogen, and it’s available as a single-stage or two-stage setup, allowing for the production of even higher purity CBD Oil or THC Oil without having to recirculate the distillate back into the feed tank.

KDL-6 Single Stage

Single Stage

SUPPORT FRAME

  • 304SS Welded Frame w/castors
  • Dimensions: 1.9m (w) x 1.9m (h) x 0.7m (d)

FEED SYSTEM

  • 2 Litre Hot Oil Heated Feed Tank
  • Feed Metering with gear pump
  • Hot Oil Traced Support Plate
  • Optional 5-litre Feed Tank

EVAPORATOR

  • Borosilicated Glass
  • 0.060 Sq. Meter Surface Area
  • Estimated Process Rate 2.00 litre/hour*

CIRCULATORS

  • Evaporator Circulator; 25-300°C
  • Condenser Circulator; -40-200°C
  • Cold Trap Circulator; -40-200°C
  • Residue Circulator; 0-250°C
  • Feed Circulator; 0-250°C

SAMPLE COLLECTION

  • 6-Position Carousel
  • Optional 2-litre or 5-litre Receiving Flask

VACUUM SYSTEM

  • Enclosed w/brine Cold Trap insert
  • Backing RVP 8 m3/hour
  • Oil Diffusion 50 l/sec

MISCELLANEOUS

  • Optional Electrical Control Cabinet
  • Electrical Load: 230V 3 ph 60 amp
KDL-6 Two Stage

Two Stage

SUPPORT FRAME

  • 304SS Welded Frame w/castors
  • Dimensions: 3.3m (w) x 1.9m (h) x 0.7m (d)

FEED SYSTEM

  • 2 Litre Hot Oil Heated Feed Tank
  • Feed Metering with gear pump
  • Hot Oil Traced Support Plate
  • Optional 5-litre Feed Tank

EVAPORATOR

  • Borosilicated Glass
  • 0.060 Sq. Meter Surface Area
  • Estimated Process Rate 2.00 litre/hour*

CIRCULATORS

  • Evaporator Circulator; 25-300°C
  • Condenser Circulator; -40-200°C
  • Cold Trap Circulator; -40-200°C
  • Residue Circulator; 0-250°C
  • Feed Circulator; 0-250°C

SAMPLE COLLECTION

  • 6-Position Carousel
  • Optional 2-litre or 5-litre Receiving Flask

VACUUM SYSTEM

  • Enclosed w/brine Cold Trap insert
  • Backing RVP 8 m3/hour
  • Oil Diffusion 50 l/sec

MISCELLANEOUS

  • Optional Electrical Control Cabinet
  • Electrical Load: 230V 3 ph 100 amp


* Process flowrates are based on heat exchanger efficiency and may differ based on amount of low boiling molecules in process feed.